2147C Fletcher Ave Indianapolis, IN, 46203   800.897.8481   317.636.0751   Facebook   Twitter

Single Wall Black Stove Pipe/Class A & Components

Heat Fab 22 Gauge Single Wall Black Stovepipe and Components
Learn More
Heat Fab 22 Gauge Single Wall Black Stovepipe and Components
Also Known as Saf-T-Liner

It's made from 22 gauge .030 cold roll steel with 100% laser or advanced resistancewelded seams. It is 60% thicker pipe than most hardware store brands and it guarantees a completely sealed seam which means no smoke or flue leakage. It is designed for interior use only, to vent coal or wood burning appliances. Available in a full range of parts and sizes individually wrapped and packaged for FedEx.
Gray Metal 24 Gauge Single Wall Black Stovepipe and Components
Learn More
Gray Metal 24 Gauge Single Wall Black Stovepipe and Components

An alternative stovepipe with a snap lock seam made of 24 ga steel. We offer in standard 6", 7", and 8" diameters. 12" and 24" lengths available as well as a 90 deg adj. elbow, flared tee, end cap, and increaser/reducers.
Selkirk Model Ultra-Temp Class A
Learn More
Selkirk Model Ultra-Temp Class A

This Multi-Fuel system is ideal for venting residential appliances, burning natural and LP gas, #2 oil, and wood. It's specially designed for today's modern, high efficiency "airtight" wood stoves (solid fuel wood burning fireplaces). Selkirk has a smooth inner liner that produces rapid stabilization for strong draft and heats fast to minimize condensation as waste gases are exhausted. The outer casing carries structural loads leaving the inner pipe free to expand without stress. Tested to 2100° F, a high temperature test option of Underwriters' Laboratories safety standard for factory built chimneys, UL-103 sixth edition. Heavy duty stainless steel is used for all system components. This lightweight pipe has threaded internal couplers that lock together with an 1/8 turn. Locking bands included with every pipe.

Components & Adapters

Round to Oval Adapters
Heat Fab
Learn More
Round to Oval Adapters

Here is the solution to connect 8" round 22 ga single wall black stovepipe to the stove. The centerline adapter is 111/2" high with a round female end accepting 8" pipe and an oval male end 53/8" x 93/4". The offset adapter is 93/4" high with a round female end accepting 8" pipe and an oval male end 53/8" x 93/4".
Saf-T-Increaser/Reducer
(no crimp)
Call 1.800.997.8481
Heat Fab Saf-T-Thimbles
Learn More
Heat Fab Saf-T-Thimbles

This easy to install thimble allows stove pipe to pass safely through walls to a masonry chimney flue. Heavy duty insulated steel construction shields the wall from heat, therefore reducing the 18" minimum clearance. This unique insulating factor allows for wall thickness of 4" - 8".
Heat Fab Saf-T-Wrap
Learn More
Heat Fab Saf-T-Wrap

Insulation is required for wood, wood pellet and coal applications. Oil and gas applications are recommended to be insulated, but not required. Heat-Fab Saf- T-Wrap is available in 2 foot sections and is an easy, convenient way to insulate our rigid lining system.
Flush Stove Adapter
Call 1.800.997.8481
Damper Kit
Call 1.800.997.8481
Insulated Wall Thimble
Call 1.800.997.8481
Oval to Round Adapler
Selkirk
Call 1.800.997.8481
Finishing Band
Call 1.800.997.8481
Vertical Installation Kit
Call 1.800.997.8481
24" Length Pipe
Call 1.800.997.8481
Adjustable Length Pipe
Call 1.800.997.8481
Masonry Adapter
Call 1.800.997.8481
90° Fixed Elbow
Call 1.800.997.8481
45° Fixed Elbow
Call 1.800.997.8481
Stove Adapter
Call 1.800.997.8481
Tee with End Cap
Call 1.800.997.8481
Chimney Pipe Adapter
Learn More
Chimney Pipe Adapter

(Used for connection to the Model DSP pipe. (It comes with a finishing sleeve.)
48" Length Pipe
Call 1.800.997.8481
15° Elbow Kit
Call 1.800.997.8481
Tee with Insulated Tee Cap
Call 1.800.997.8481
Roof Support Package
Call 1.800.997.8481
Wall Support Kit
Call 1.800.997.8481
Universal Interior Resupport
Call 1.800.997.8481
Attic Insulation Shield
Call 1.800.997.8481
Universal Roof Brace Kit
Call 1.800.997.8481
Flat Ceiling Support Kit
Call 1.800.997.8481
Thru-The-Wall Support Kit
Call 1.800.997.8481
Roof Support Kit
Call 1.800.997.8481
Locking Band
Call 1.800.997.8481
Wall Band
Call 1.800.997.8481
Finishing Collar
Call 1.800.997.8481
Trimplate Spacer
Call 1.800.997.8481
Dripless Smoke Pipe Adapters
Learn More
Dripless Smoke Pipe Adapters

Used to connect single wall pipe to Ultra-Temp Selkirk insulated chimney pipe. It's designed to slip inside the single wall stove pipe to contain any creosote dripping down the chimney to the inside of the pipe system. Choose the DSA for use in retrofit installations and the DSAC (includes coupler) for use in new installations.
Pitched Ceiling Plate
Call 1.800.997.8481
Round Top
Call 1.800.997.8481
Storm Collar
Call 1.800.997.8481
Adjustable Roof Flashing
Call 1.800.997.8481
Universal Rubber Boot Flashing Adapter
Call 1.800.997.8481
Pitched Ceiling Support Kit
Call 1.800.997.8481
Insulated Wall Thimble
Learn More
Insulated Wall Thimble

Installs quickly and eliminates the need for using individual fire stops. The round shielding acts as a radiation shield and provides the required 2" air space clearance to combustibles. The two sections telescope to accommodate 6 to 11 inch wall thickness.
Fire Stop/Joist Shield
Learn More
Fire Stop/Joist Shield

Used in floor/ceiling penetrations other than those which include a ceiling support. Not required when passing through the roof.

Other

1200° Stove Pipe
Learn More
1200° Stove Pipe

Resists peeling and blistering when subjected to temperatures up to 1200ºF. Renews and protects finishes on steel or cast iron stoves, ovens, grills and cookers. Dries to flat black finish.
Stove & Grill Paint
Learn More
Stove & Grill Paint

Adheres to stainless and aluminum without primer. Won't peel or blister at 1400° F. Lower odor than competitive products. We stock in flat black but it is available in other colors, cases of 6. Call for a quote.
Stove Thermometer
Learn More
Stove Thermometer

Helps monitor stove temperature to reduce chance of creosote buildup. Ceramic face will not fade and the strong magnet holds the thermometer in place on the stove top, door or flue pipe.